Post by scrambler on Feb 24, 2018 23:22:44 GMT -5
Hey All,
Based on anecdotal reports, early TX engines were assembled with a weaker starter chain that was supported by a guide bolted on the two M6 threaded holes behind the flywheel. I`ve never seen such an original chain guide until today, when I pulled apart an early engine from 72. I`m posting a few pics, just FYI.
Based on anecdotal reports, early TX engines were assembled with a weaker starter chain that was supported by a guide bolted on the two M6 threaded holes behind the flywheel. I`ve never seen such an original chain guide until today, when I pulled apart an early engine from 72. I`m posting a few pics, just FYI.
