|
|
Post by scrambler on Oct 22, 2017 22:29:45 GMT -5
Hey Folks,
Could someone tell me the length of the new type steel clutch push rod so I can cut the old long one to the correct size? I have the aluminum part, just don`t have the steel part, part #: 341-16357-03-00
Many thanks!
|
|
|
|
Post by jonesey on Oct 24, 2017 2:18:40 GMT -5
G/Day Scrambler.
I went to have a look at my Box of bits last night but sadly mine are all mixed up with XS 650 parts. But we could work it out i think. The one steel rod i have measures 263 mm which i think is the TX one.
All of the Aluminium ones measure 150 mm. (common to both models). Then the steel one should be 105 mm + the 8 mm ball + 150 mm (Aluminium one) gives us 263 mm.
I must really sort my stuff out and label things.
If your steel rod measures the same, that's what u need to end up with.
Hope it helps. But always remember the old adage "measure twice and cut once"
Best Possible Regards Jonesey.
|
|
|
|
Post by scrambler on Oct 24, 2017 13:36:17 GMT -5
Thanks Jonesy, It makes sense. I`m just gonna cut it to size and see if it works. If not, I`ll cut another one. If my math is correct, eventually I will be ending up with two rods, anyone wants the other?  |
|
