|
|
Post by blacopal on Jan 14, 2015 17:37:03 GMT -5
|
|
bigskyforever
Junior Member
I reside in Edmonton Alberta Canada. I am presently rebuilding a couple of TX`s.
Posts: 87 
|
Post by bigskyforever on Jan 15, 2015 22:41:10 GMT -5
Blacopal;
Thanks for the photo. Would it be correct to say one hose fitting to the oil tank and the other to the engine.
|
|
|
|
Post by blacopal on Jan 16, 2015 16:55:23 GMT -5
Essentially - yes. The pipe that disappears under the oil tank is the new return line. The inside fitting to the crankcase remains the same.
|
|
|
|
Post by farmrjohn on Jan 19, 2015 11:14:01 GMT -5
Those look like the "factory" lines. When I put on my oil cooler I couldn't find the lines so used flexible hose, one on either side of the cylinders. The sump return output goes to the cooler, then the cooler back to the tank.  |
|
