Post by jukkamar on Jan 11, 2015 16:02:24 GMT -5
Sometimes it is useful to make a light honing of cylinders. It can be done easily using DIY tool.
I took an empty spray can that had a proper diametre to TX cylinder. Also I added some bubble plastic to create even pressure for grinding paper.
Bolt fitting in the middle of can bottom is a connection to drill.
Criss-cross grinding can be done by adjusting rotation and linear movement together.
Result is just like from school books.
Hope you'll find this useful.
More about: coxengineering.sharepoint.com/Pages/Boreglazing.aspx
Jukka
I took an empty spray can that had a proper diametre to TX cylinder. Also I added some bubble plastic to create even pressure for grinding paper.
Bolt fitting in the middle of can bottom is a connection to drill.
Criss-cross grinding can be done by adjusting rotation and linear movement together.
Result is just like from school books.
Hope you'll find this useful.
More about: coxengineering.sharepoint.com/Pages/Boreglazing.aspx
Jukka