|
Post by farmrjohn on Oct 27, 2014 21:42:42 GMT -5
My speedo needle is sticking. How do I remove the speedo unit for servicing?
|
|
|
Post by farmrjohn on Oct 28, 2014 20:01:48 GMT -5
Answered my own question, and this would be handy for replacing inop bulbs as well. 1. Disconnect speedo cable. 2. Remove back cover and rubber bellows (two small phillip head screws). 3. Remove two light holders 4. Remove two nuts from holding bracket, and remove bracket. 5. Pull speedo upward and out of instrument panel. Installation is the reverse of the steps.
|
|
|
Post by CalsXS2 on Oct 28, 2014 22:26:09 GMT -5
Could that be just a bad cable. Mine just broke.
Also. Are you going to go with led bulbs while you have it apart.
|
|