Post by cymro on Apr 11, 2020 7:39:41 GMT -5
I have a tx that was raced over 10 yrs ago. I am just giving it a check over and want to set the points/timing.
The problem is it is running a total loss system direct from the battery and does not have any internal electrics,so no timing marks on rotor .
I can do it by measuring the distance of the piston BTDC for ign.But I need to know that figure if someone could tell me thanks.
I will put up some pix later
Keep safe in these strange times
The problem is it is running a total loss system direct from the battery and does not have any internal electrics,so no timing marks on rotor .
I can do it by measuring the distance of the piston BTDC for ign.But I need to know that figure if someone could tell me thanks.
I will put up some pix later
Keep safe in these strange times