chris
New Member
Posts: 4
|
Post by chris on Apr 8, 2019 1:51:17 GMT -5
Hi all, I took my engine out to due to (minor) oil leakage between the head and the cylinders and to take a general check on wear and tear of cylinders, valves etc. I sourced a new engine gasket set on ebay which I believed was a genuine set, but it isn't and maybe there are no genuine sets available anymore. Both the engine block, cylinders and the head have a machined groove like grooves for an o-ring, but the new gaskets or the set doesn't contain anything to suit these grooves. The old head gaskets also have some kind of extra "edge" to fit the grooves - see photo. Can anybody tell me if I need to find another design cylinder and head gaskets making sure of as tight engine as possible ? Or maybe I´m only missing the long "o-rings" to suit the machined grooves?
|
|
|
Post by tr1ppler on Apr 8, 2019 8:51:22 GMT -5
|
|