|
Post by tx1972 on Feb 8, 2017 0:57:02 GMT -5
Hi Guys Could someone tell me the correct lenghts of the throttle cables as well as the clutch,as my bike when I got it had ape hangers handlebars and I need to shorten them to the correct lenghts.Any help would be appreciated .Great forum ,very helpful,great bikes. 👍
|
|
pewe
New Member
Posts: 29
|
Post by pewe on Feb 11, 2017 8:11:25 GMT -5
Hello, Depends on the handle you use, high or flat. We had 2 cable sets in Europe. Cheers Peter
|
|
|
Post by norwegian on Feb 22, 2017 8:02:49 GMT -5
Hello, Depends on the handle you use, high or flat. We had 2 cable sets in Europe. Cheers Peter Hi, I have a to long clutch cable because i had a USA handlebar, i replace it With a euro flat handlebar. I cannot find the correct cable any place. Do you know where i can buy a cable for the Euro handlebar.
BR
Jarle Robersten
|
|
|
Post by norwegian on May 29, 2017 13:56:16 GMT -5
Hello, Depends on the handle you use, high or flat. We had 2 cable sets in Europe. Cheers Peter Hi, I have a to long clutch cable because i had a USA handlebar, i replace it With a euro flat handlebar. I cannot find the correct cable any place. Do you know where i can buy a cable for the Euro handlebar.
BR
Jarle Robersten
|
|
|
Post by norwegian on May 29, 2017 13:58:27 GMT -5
I use a flat handlebar.
|
|
|
Post by farmrjohn on May 29, 2017 16:00:20 GMT -5
There are some youtube tutorials on making your own cables. That might be an option on shortening yours once your new bar is in place and you can measure the actual length you need. I also sent an old clutch cable to Motion Pro and they made a new outer and inner, using the original metal neck that bends into the bottom of the transmission case because they didn't have a similar replacement part. I'll see if I can find the inner length since I had them shorten it to provide more range for the adjuster on the handlebar. I think I have the standard US bar, or one similar so the length might be slightly longer than needed for a flat bar.
|
|