|
|
Post by retromech on Feb 9, 2016 12:19:26 GMT -5
Hi Fellow tx'ers, Can anyone for certain say if I can remove the cam cover on my tx without removing the engine, it has the common "burger" head cover, not the very very rare "alligator" or "crocodile" type, I have seen conflicting views on this, I did try it once before but with no success, am I missing some secret procedure or is it not practical ? Thanks in advance Paul. |
|
bigskyforever
Junior Member
I reside in Edmonton Alberta Canada. I am presently rebuilding a couple of TX`s.
Posts: 87 
|
Post by bigskyforever on Feb 10, 2016 14:45:02 GMT -5
I tried to remove it and had no success either.
|
|
|
|
Post by retromech on Feb 11, 2016 5:41:41 GMT -5
Thanks for that, in a way pleased I am not the one unable to remove it, wondered if after using spanners for 49 years I was loosing my ability to work on engines !!!
|
|
mauro
New Member
Posts: 3
|
Post by mauro on Nov 28, 2020 2:15:43 GMT -5
therefore it is not possible to remove the cover without extracting the motor from the frame?
|
|
|
|
Post by retromech on Nov 28, 2020 6:24:36 GMT -5
I was able to remove mine by taking out the engine mounting bolts and moving the engine about, still not easy but possible, hope this helps.
|
|
mauro
New Member
Posts: 3
|
Post by mauro on Nov 29, 2020 10:43:31 GMT -5
so you removed the engine mounting bolts and lowered it a few centimeters?
|
|
