jukkamar
New Member
Yamaha twins are kings
Posts: 22
|
Post by jukkamar on Jan 11, 2015 17:04:19 GMT -5
Exhaust manifold of my project bike had been overtightened. Result of this was bended surfaces. I straightened surface using grinder and grinding paper. Finetuning needs markings using marker pen. I mounted manifold to engine head first quite loose. After first engine start I had a final tightening. Cast aluminium manifold is very soft and gets easily damaged by overtightening. Better be careful. Any experiences with this? Jukka
|
|
|
Post by Walt on Sept 17, 2018 14:45:42 GMT -5
Can anyone help me get an exhaust manifold( decent )and parts for this bike's exhaust ? =]
|
|